Dan · KICKR v5 has a Cog but no virtual gears
The KICKR v5 accepts a Cog on its stock HG body. The rider needed mechanical gears on this generation.
Original rider reportIndoor trainer compatibility
A working cassette can stay on a compatible trainer. A Cog can make sharing bikes easier. Check your model and riding app before buying a kit.
Check my setup
Sources checked
Setup result
Check the model printed on your trainer’s white label.
CORE 2 · cassette · Play 2.0.1 or later
Still unverified on both apps At the same grade and cadence, does pedal load change and stay changed, both before and after reconnecting?
What counts? In both runs, higher gear should give sustained higher watts and heavier pedals, then both should return near the first low gear. A changing gear number or brief spike alone leaves the result unverified. If grade or cadence drifts, repeat that run.
On ROUVY you can run the sequence with the on-screen buttons first. Record that separately, then do both runs with Play.
Use this log to compare pedal load in six segments. How to test Zwift or ROUVY when gear changes feel flat.
Compare each run on the same grade and at steady cadence. Look for sustained higher watts and heavier pedals in high gear, then a return near the first low. A full sheet alone does not establish a repeatable change in load.
A Cog can fit a KICKR v5, but the v5 cannot shift virtually. A v6 or CORE with a working cassette can keep it when the app, controls and firmware support the setup.
| Trainer | Trainer supports shifting | Trainer firmware |
|---|---|---|
| KICKR v5 2020 | Unsupported | — |
| KICKR v6 2022 | Supported | 5.2.15+ |
| KICKR CORE 1st generation | Supported | 1.3.17+ |
| KICKR CORE 2 | Supported Play 2.0.1+ ride test pending with cassette | 2.2.44+ or 3.2.44+ Match the installed branch |
| KICKR MOVE | Supported | 1.3.14+ ROUVY lists 1.5.24 |
Model and firmware baselines · Wahoo documentation ↗
Listed means the platform documents virtual shifting. “Badge off” means ROUVY lists the trainer but leaves its virtual-shifting badge off. “Not listed” refers to Zwift’s published Cog list. “Unconfirmed” means ROUVY does not identify this exact model for shifting. Kit fit, a documented shifting feature and a repeatable change in pedal load are checked separately. A pending ride test means we have no controlled before-and-after reconnect record for that setup.
| Trainer | Zwift | ROUVY |
|---|---|---|
| Wahoo KICKR v4 · 2018 | Unsupported | Unsupported |
|
A Cog can mount on the stock HG body. The v4 cannot use it for native shifts. Keep the cassette and use your derailleur. A v4 owner installed a Cog and paired Play. Zwift support identified the v4 after the shifting option failed to appear. Controlled reconnect test on Zwift and ROUVY: pending. Wahoo drivetrain fit · Wahoo models & firmware · Installed Cog on a KICKR v4 |
||
| Tacx FLUX 2 Smart | Unsupported | Badge off |
|
A FLUX 2 owner received a return label after the Cog 1.1 Multi-Trainer kit failed to fit. No manufacturer-approved FLUX 2 kit was found. The reported return establishes a mounting failure for that kit. Controlled reconnect test on Zwift and ROUVY: pending. |
||
| Tacx FLUX S Smart | Unsupported | Badge off |
|
The Garmin Tacx kit in the US shop covers selected NEO trainers. Keep your FLUX S cassette. Reports involving a bridge app use a different connection path. Controlled reconnect test on Zwift and ROUVY: pending. Zwift support on FLUX shifting · FLUX S buyer’s question · Zwift kit selector |
||
| Saris H3 | Not listed | Badge off |
|
No H3 kit is listed by Zwift. Keep your cassette. The ROUVY Hammer / H2 / H3 card covers ordinary riding and leaves its shifting badge off. Controlled reconnect test on Zwift and ROUVY: pending. |
||
| Saris H3 Plus (H3+) | Not listed | Unconfirmed |
|
Saris lists application compatibility for the H3 Plus. Zwift does not list an H3 Plus Cog kit, and ROUVY’s H3 card does not name the Plus. Keep your cassette. Controlled reconnect test on Zwift and ROUVY: pending. |
||
| Tacx NEO 2 Smart | Listed | Unconfirmed |
|
The US kit selector specifies a Type 2 axle. White lettering identifies that cap; an all-black cap needs the separate Cog-transfer procedure. Confirm the axle before ordering. Controlled reconnect test on Zwift and ROUVY: pending. Zwift kit selector · Zwift’s NEO axle and kit guide · Zwift model, firmware and Ride frame notes |
||
| Tacx NEO 2 Special Edition (2SE) | Listed | Unconfirmed |
|
Zwift’s installation guide lists the Garmin Tacx Cog v2 kit as fitting the 2SE as shipped. Select the Garmin variant for this trainer. One owner saw virtual shifting appear in Zwift after updating the 2SE firmware. Controlled reconnect test on Zwift and ROUVY: pending. Zwift’s NEO axle and kit guide · Zwift model, firmware and Ride frame notes · Zwift kit selector |
||
| Tacx NEO 2T | Listed | Badge off |
|
Zwift rider report with a cassette. ROUVY groups Neo and Neo 2T on one card. |
||
| Tacx NEO 3M | Listed | Listed |
|
Zwift excludes the Ride Smart Frame on this model. |
||
| JetBlack Volt V1 | Unsupported | Unsupported |
|
Keep a suitable cassette and mechanical shifting. Check the generation before buying a kit. |
||
| JetBlack Volt V2 | Listed | V2 in notes |
|
Check the axle housing against the V2 photo in the Zwift list. ROUVY’s shared Volt card specifies V2 in its notes. |
||
| JetBlack Victory | Listed | Listed |
|
Check what is fitted before ordering another Cog. |
||
| Elite Direto | Listed | Badge off |
|
The original Direto and Direto X have different ROUVY listings. |
||
| Elite Direto X | Listed | Listed |
|
Use the exact X model when checking support. |
||
| Elite Direto XR | Listed | Listed |
|
ROUVY lists XR and XR-T together. |
||
| Elite Direto XR-T | Listed | Listed |
|
ROUVY lists XR and XR-T together. |
||
| Elite Avanti | Listed | Listed |
|
Available with a preinstalled Cog. Check your drivetrain. |
||
| Elite Rivo | Listed | Listed |
|
Check whether your unit came with a Cog and controls. |
||
| Elite Suito-T | Listed | Unconfirmed |
|
Choose the Elite 18-tooth kit in the US selector for a Suito-T. The Multi-Trainer version has a different freehub. ROUVY lights the Suito badge but does not name the T separately. A Suito-T owner reported receiving a Multi-Trainer Cog that would not mount. Controlled reconnect test on Zwift and ROUVY: pending. |
||
| Elite Suito | Listed | Listed |
|
Check your exact model and update its firmware. |
||
| Elite Justo | Listed | Listed |
|
Use Bluetooth on the first Justo. |
||
| Elite Justo 2 | Listed | Listed |
|
ROUVY lists Wi-Fi for Justo 2. |
||
| Zwift Hub | Listed | Listed |
|
After changing from cassette to Cog, check the Hub recalibration instructions. |
||
Keep the cassette for a ride test. Zwift has a rider report with this hardware from before Play 2.0.1. ROUVY documents native Play support from 2.0.1, while Wahoo still lists Play for Zwift only. Sustained load changes on the exact setup after reconnecting remain unverified in both apps.
These five riders reported different outcomes. Each case links to the original report and can be replayed in the checker.
The KICKR v5 accepts a Cog on its stock HG body. The rider needed mechanical gears on this generation.
Original rider reportA v6 owner described leaving the chain near the middle of a regular cassette for virtual shifts. The controller version was not reported.
Original rider reportOn a first-generation CORE, Markus felt load changes after checking wheel circumference. The lowest gears still felt similar.
Original rider reportOn ROUVY, the screen buttons changed load on a CORE 2. The rider reported that the Ride handlebars worked after pairing them separately.
Original rider reportOn a KICKR v6, changing wheel circumference helped briefly. The rider continued to lose resistance in free ride. The cause remains unknown.
Original rider report